Machine · Commercial-size 58 mm machines
Profitec GO accessories: tamper, screen and bottomless fit
Profitec's GO 2.0 has a ring brew group, not an E61, and ships with a bottomless portafilter. Normcore lists 58.5 mm tampers and screens for it.
Also listed as GO 2.0
We may earn a commission if you buy through links on this page, at no extra cost to you. Unless a page says otherwise, our picks come from published specifications and listing research, not hands-on testing. How we make money · How we research
Short answer
Profitec describes the GO 2.0 as a single boiler with a ring brew group and does not call it an E61, so E61 portafilters are not automatically a fit. It already ships with a bottomless portafilter, a blind filter and a tamper. Profitec gives no portafilter or tamper diameter; Normcore lists the GO with a 58.5 mm tamper and puck screen and a 58 mm funnel.
Key facts
- Portafilter
- 58 mm class[1]Only third parties give a size: Normcore lists the Pro 300 / Go / Move with 58 mm-class tools. Profitec's GO 2.0 page, product card and manual state no portafilter diameter.
- Tamper size
- 58.5 mm (Normcore)[1]Normcore's size for the GO. Profitec ships a tamper with the GO 2.0, but its page, product card and manual give no diameter.
- Puck screen size
- 58.5 mm[1]Normcore's size for its own screens; Profitec gives none.
- Dosing funnel
- 58 mm[1]Normcore's size for the GO; Profitec's own 58 mm funnel has no model list.
- Group / system
- Ring brew group[2][3]Profitec: 'Single boiler with ring brew group'. Profitec does not call it an E61.
- Bottomless portafilters
- Included[2]Profitec ships the GO 2.0 with a bottomless portafilter with silicone attachments, a blind filter and a coffee tamper.
Watch out for
- The GO has a ring brew group, not an E61. An 'E61' bottomless portafilter is not automatically a fit, and the GO already comes with a bottomless one.
- Profitec gives no portafilter or tamper diameter for the GO 2.0; the 58 mm-class sizes come from Normcore.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
Tamper
ALIKISSCAFE 30 lb constant-pressure calibrated tamperChoose 58 mm, flat base.
Seller's sizing. Profitec gives no tamper size for the GO; a 58 mm base is the looser of the two options here.
Sold by ALIKISSCAFE Official Store
Tamper (Normcore's 58.5 mm size)
IKAPE V3 calibrated spring-loaded tamperChoose the 58.5 mm base.
Seller's sizing. Matches Normcore's 58.5 mm; Profitec gives no tamper size for the GO.
Sold by IKAPE Official Store
Puck screen
MHW-3BOMBER puck screen (0.2 or 0.8 mm)Choose 58.5 mm, 0.2 mm thick.
Seller's sizing, matching Normcore's 58.5 mm. The 0.2 mm screen takes up less headspace than the 0.8 mm one.
Sold by MHW-3BOMBER Official Store
Dosing funnel
MHW-3BOMBER magnetic dosing funnel (53/54 or 58 mm)Choose the 58 mm size.
Seller's sizing for 58 mm portafilters. Magnetic funnels also depend on the portafilter's material.
Sold by MHW-3BOMBER Official Store
Profitec's current model is listed as the GO 2.0.
Questions
Will an E61 bottomless portafilter fit the Profitec GO?
Do not assume so. Profitec describes the GO 2.0's group as a ring brew group, not an E61, and the machine already ships with a bottomless portafilter.[2]
What size tamper fits the Profitec GO?
Normcore lists 58.5 mm for the GO. Profitec's GO 2.0 page, product card and manual do not give a diameter for the included tamper or the portafilter.[1][3][4]
What comes with the Profitec GO 2.0?
Profitec lists a bottomless portafilter with silicone attachments, a blind filter and a coffee tamper.[2]