Machine · Commercial-size 58 mm machines
Lelit Mara X accessories: tamper, puck screen and funnel sizes
The Mara X (PL62X) uses Lelit's L58E group and LELIT58 tools. Lelit gives no diameter; Normcore lists 58.5 mm tampers and screens and a 58 mm funnel.
Also listed as PL62X, PL62X-120
We may earn a commission if you buy through links on this page, at no extra cost to you. Unless a page says otherwise, our picks come from published specifications and listing research, not hands-on testing. How we make money · How we research
Short answer
The Mara X has Lelit's L58E group, compatible with LELIT58 barista tools, and ships with a LELIT58 filterholder, IMS-made LELIT58 filters, a blind filter and a LELIT58 stainless steel tamper. Lelit gives no diameter. For add-ons, Normcore lists a 58.5 mm tamper and puck screen and a 58 mm funnel. Lelit does not call the group an E61, though Normcore's guide does.
Key facts
- Portafilter
- LELIT58[1]Lelit supplies a LELIT58 filterholder and names no diameter; Normcore lists the Mara X with 58 mm-class tools.
- Tamper size
- 58.5 mm (Normcore)[2]Normcore's size for the Mara X. The machine already ships with a LELIT58 stainless steel tamper.
- Puck screen size
- 58.5 mm[2]Normcore's size for its own screens on the Mara X.
- Dosing funnel
- 58 mm[2]Normcore's funnel size for the Mara X.
- Group / system
- L58E (LELIT58)[1][3]Lelit: 'L58E group with mechanical pre-infusion compatible with LELIT58 barista tools'. Lelit does not call it E61; Normcore's guide labels it 'E61 Group Head'.
- Bottomless portafilters
- Not confirmedNo source we checked lists a bottomless portafilter for the Mara X. Lelit ships a LELIT58 bottomless filterholder with the Bianca, which takes the same LELIT58 tools.
Watch out for
- Lelit calls the group L58E and its tools LELIT58, never E61. For parts that lock into the group, such as a bottomless portafilter, look for LELIT58 compatibility rather than a generic E61 label.
- The Mara X already includes a blind filter and a LELIT58 stainless steel tamper.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
Tamper
ALIKISSCAFE 30 lb constant-pressure calibrated tamperChoose 58 mm, flat base.
Seller's sizing. Lelit publishes no basket diameter; of the two tampers here, the 58 mm base is the looser fit.
Sold by ALIKISSCAFE Official Store
Tamper (Normcore's 58.5 mm size)
IKAPE V3 calibrated spring-loaded tamperChoose the 58.5 mm base.
Seller's sizing. Matches the 58.5 mm Normcore lists for the Mara X.
Sold by IKAPE Official Store
Puck screen
MHW-3BOMBER puck screen (0.2 or 0.8 mm)Choose 58.5 mm, 0.2 mm thick.
Seller's sizing, matching Normcore's 58.5 mm. The 0.2 mm screen takes up less headspace than the 0.8 mm one.
Sold by MHW-3BOMBER Official Store
Dosing funnel
MHW-3BOMBER magnetic dosing funnel (53/54 or 58 mm)Choose the 58 mm size.
Seller's sizing for 58 mm portafilters. Magnetic funnels also depend on the portafilter's material.
Sold by MHW-3BOMBER Official Store
Lelit lists a 120 V version, PL62X-120.
Questions
Is the Lelit Mara X an E61 machine?
Lelit does not call it one: its spec sheet describes an L58E group with mechanical pre-infusion, compatible with LELIT58 barista tools. Normcore's compatibility guide labels it 'E61 Group Head'.[1][2]
What size tamper fits the Mara X?
The Mara X ships with a LELIT58 stainless steel tamper. For an aftermarket one, Normcore lists 58.5 mm.[1][2]
What comes with the Mara X for the portafilter?
Lelit's spec sheet lists a LELIT58 filterholder, IMS-made LELIT58 filters, a blind filter and a LELIT58 stainless steel tamper.[1]